Peaty's Tubeless Rim Tape Updated Version

Peatys
SKU:
PTY-PRJ
Availability:
Usually Ships in 24 hours.
$30.20
(No reviews yet)
Condition:
New
  • Peaty’s Tubeless Tape
  • Super high tensile strength
  • Tape forms a strong air-tight seal
Current Stock:

The best Tubless Tape for the job, trust Peaty's
Designed by pro riders, mechanics and scientists, Peaty’s Rim Job has been developed from the ground up as a bicycle rim tape. The super high tensile strength tape is primed with a bespoke adhesive for extra grip.

Constructed from dual-layered, high tensile strength film. unique cold-foil silver logos are sandwiched between two layers of film for a long-lasting premium finish. Primed with a bespoke adhesive, our tape forms a strong air-tight seal with your rim, yet leaves little to no mess behind when removed! An optimum amount of stretch and a large, rigid recyclable core allows the tape to be pulled and applied with tension, contouring to your rim tightly for a better fit. Transparent design makes finding the valve hole easy. Cloth finishing strips included for a perfect seal (5x per 9m and 28x per 50m roll).

One 9 meter roll will cover approximately
• 5x 26" Rims
• 4x 27.5" Rims
• 4x 29" Rims
• 4x 700c rims

Fitting Instructions
1. Remove tyre and any old rim tape
2. Clean and degrease rim thoroughly
3. Ensure rim is completely dry before application
4. Press tape firmly into the centre of the rim and smooth out to the edges, removing any trapped air
5. Run tape around the rim while keeping tape tension and allowing for at least 10cm overlap of tape at the end when cut
6. Use a small spike to pierce the tape in the centre of the valve hole
7. Remove dust cap and Push valve through the valve hole
8. Apply lock ring tightly by hand, ensuring there are no air gaps
9. Refit tyre, add Peaty’s Tubeless sealant, inflate Tyre
10. Ride!

Brand:
Peatys
Product Type:
Tubeless Tape
Category:
Cycling